2006–2013 GM Body Control Module (BCM) Programming — PN 15948439

Programmed to Your VIN — Plug In and Go

We program replacement GM Body Control Modules to your vehicle's VIN before we ship. When it arrives, it's ready to install — no dealer visit, no scan tool for initial setup, no waiting. VIN programming, vehicle option configuration, and module setup are all done before it ships.

This listing covers GM BCM part number 15948439 and its compatible interchange numbers across GM trucks, SUVs, vans, crossovers, and passenger cars from 2006–2013.

Two Options — You Choose

Option 1: Send Us Your BCM — $175

Already have a replacement BCM? Ship it to us with your VIN. We'll program it and send it back ready to install.

1. Order and provide your VIN at checkout.

2. Ship us your BCM.

3. We program it — VIN, vehicle configuration, and option setup.

4. We ship it back. Plug in and go.

Option 2: Buy a Programmed BCM — $275

Don't have a BCM yet? We'll provide a tested unit programmed to your VIN and ready to install.

1. Order and provide your VIN at checkout.

2. We source and test a compatible BCM.

3. We program it to your vehicle.

4. It ships to you. Plug in and go.

What Is a Body Control Module?

The Body Control Module (BCM) is the central electronic controller for your vehicle's body functions — power windows, door locks, interior and exterior lighting, turn signals, security system, climate control, and instrument cluster communication. When a BCM fails, common symptoms include erratic window or lock operation, lights not responding correctly, security malfunctions, no-start conditions, and multiple DTCs across several systems.

A replacement BCM must be programmed to your vehicle's VIN before installation. Without programming, the module will not communicate with the rest of the vehicle. That's what we do.

Compatible Vehicles

Passenger Cars

Chevrolet Impala 2006–2013

Chevrolet Monte Carlo 2006–2007

Chevrolet Caprice PPV 2011–2013

Buick Lucerne 2006–2011

Cadillac CTS 2008–2013

Cadillac DTS 2006–2011

Cadillac STS 2010

Pontiac G8 2008–2009

Lambda Crossovers

GMC Acadia 2007–2012

Buick Enclave 2008–2012

Chevrolet Traverse 2009–2012

Saturn Outlook 2007–2010

Theta & Related Crossovers / SUVs

Chevrolet Equinox 2007–2009

Pontiac Torrent 2007–2009

Cadillac SRX 2007–2009

Saturn Vue 2008–2010

Chevrolet Captiva Sport 2012

GMT900 Trucks & SUVs (Select Years)

Chevrolet Tahoe 2010

Chevrolet Suburban 1500 2010

Chevrolet Avalanche 1500 2010

GMC Yukon 2010

GMC Yukon XL 1500 2010

Cadillac Escalade / ESV / EXT 2010

Hummer H2 2008–2009

Full-Size Vans

Chevrolet Express 1500 2008–2012

Chevrolet Express 2500 / 3500 2008–2012

GMC Savana 1500 2008–2012

GMC Savana 2500 / 3500 2008–2012

Compatible Part Numbers

Your BCM part number is printed on the module label or can be read with a scan tool. Confirm your part number matches one of these before ordering. If you don't see yours, contact us — we'll check compatibility.

95151084 · 10382479 · 15093910 · 15276271 · 15299986 · 15819552 · 15828601 · 15872388 · 15872421 · 15880684 · 15921352 · 15921353 · 15948438 · 15948439 · 20839063 · 20864768 · 20921435 · 20921436 · 20935349 · 25826125 · 25847589 · 25892622 · 25910474 · 25934762 · 25934763 - 15093911 - 15837419 - 20815898 - 20864767 - 20877550 - 22820314 - 22860591 - 22915542 - 25826124 - 25847588 - 84922494

After Installation

Your BCM arrives programmed and configured, but a few post-install steps may apply:

Airbag Light / DTC B1001 (Option Configuration Error) Normal after any BCM replacement. The new BCM needs to sync with the Sensing and Diagnostic Module (SDM) using an SDM Primary Key Setup procedure. This requires a Tech2 or compatible J2534 scan tool. We can walk you through this if needed.

Brake Pedal Position (BPP) Sensor Calibration A BPP learn procedure may be required to restore proper brake light operation and cruise control functionality.

Passlock / VATS Security Relearn If your vehicle has anti-theft, a 30-minute Passlock relearn cycle is required before the engine will crank. Turn the key to ON (do not start), wait 30 minutes until the security light turns off, then cycle the key. This may need to be repeated up to three times.

Why Buy From Us?

Most shops and dealerships will tell you a used BCM can't be reprogrammed or that you need a new one from GM at full dealer price. That's not true. We specialize in GM module programming and have the tools and experience to program used, tested, and verified BCMs to your vehicle. No dealer markup, no unnecessary parts replacement.

If you have questions about your specific vehicle or part number, contact us before ordering and we'll confirm compatibility.