Brute Force Bench Flasher V1 front view showing voltage and amperage display with power and ignition switches
Brute Force Bench Flasher V1 top-down view showing display and switch layout
Brute Force Bench Flasher V1 rear panel with OBD-II diagnostic connector
Brute Force Bench Flasher V1 OBD-II port close-up
Brute Force Bench Flasher V1 side view showing USB-C power input
Brute Force Bench Flasher V1 white custom color option
Brute Force Bench Flasher V1 purple custom color 3D printed enclosure
Brute Force Bench Flasher clear enclosure variant with wiring harness connected and powered on
GM instrument cluster on bench connected for programming
Brute Force Bench Flasher V1 front view showing voltage and amperage display with power and ignition switches
Brute Force Bench Flasher V1 top-down view showing display and switch layout
Brute Force Bench Flasher V1 rear panel with OBD-II diagnostic connector
Brute Force Bench Flasher V1 OBD-II port close-up
Brute Force Bench Flasher V1 side view showing USB-C power input
Brute Force Bench Flasher V1 white custom color option
Brute Force Bench Flasher V1 purple custom color 3D printed enclosure
Brute Force Bench Flasher clear enclosure variant with wiring harness connected and powered on
GM instrument cluster on bench connected for programming

Brute Force Bench Flasher V1

from $175.00

The Brute Force Bench Flasher is a standalone bench programming station for GM ECMs, TCMs, BCMs, and radios. It provides regulated power and OBD-II connectivity for bench flashing without needing the vehicle — connect your J2534 passthrough device or serial programmer (HPtuners, EFILive) via USB and flash directly from your laptop.

Power Options:

  • 12–15V from an external power brick (included or BYO depending on option selected)

  • USB Type-C PD 3.0 — power the unit directly from your laptop's USB-C port, no brick needed

Features:

  • Connects up to 3 modules simultaneously

  • Live voltage and amperage readout

  • Power and ignition indicator LEDs

  • Ignition switch for modules that require key-on

  • 10A fused protection

  • OBD-II connector with auxiliary harness support

Harnesses: ECU, TCM, BCM, and radio bench harnesses are available separately and are designed specifically for the Brute Force platform.

Custom made to order — allow 1–2 weeks for production.

Color:
Power Option:

The Brute Force Bench Flasher is a standalone bench programming station for GM ECMs, TCMs, BCMs, and radios. It provides regulated power and OBD-II connectivity for bench flashing without needing the vehicle — connect your J2534 passthrough device or serial programmer (HPtuners, EFILive) via USB and flash directly from your laptop.

Power Options:

  • 12–15V from an external power brick (included or BYO depending on option selected)

  • USB Type-C PD 3.0 — power the unit directly from your laptop's USB-C port, no brick needed

Features:

  • Connects up to 3 modules simultaneously

  • Live voltage and amperage readout

  • Power and ignition indicator LEDs

  • Ignition switch for modules that require key-on

  • 10A fused protection

  • OBD-II connector with auxiliary harness support

Harnesses: ECU, TCM, BCM, and radio bench harnesses are available separately and are designed specifically for the Brute Force platform.

Custom made to order — allow 1–2 weeks for production.

Features:

12-15v 5a Power Brick

USB-C Powered

10a Removeable mini fuse

Ignition Switch

Red LED for 12v

Green LED for !2v Ignition

3 Ports - 1) 6 Pin - 2) 16 Pin Matched to the OBD2 Port

120 Ohm CAN Terminator Resistor built in

Brute Force enables the bypassing of non-essential on-board modules in a vehicle during reprogramming, ensuring secure and dependable communication between the ECU(s) and programming equipment.

What protocols and programming interfaces does Brute Force work with?

Brute Force Supports:

  • CAN bus (OBD-II)

  • Class 2 Serial (OBD-II)

  • GM Low Speed LAN

  • J1939 (Heavy Equipment)

  • K-line

  • MEFI (GM)

  • FEPS (Ford)

  • SCI (Chrysler)

  • SCP (Ford)

While we may not have a comprehensive list of all programming and diagnostic tools, the ones listed below are frequently used by our customers and are compatible with any device that supports the OBD2 standard.

  • OEM Programming Tools

  • J2534

  • LSDroid

  • PCM Hammer

  • EFILive

  • HP Tuners

  • Alientech Interface Cable(s)

  • DimSport Interface Cable(s)

  • Drew Technologies Interface Cable(s)

  • EASE Diagnostics Interface Cable(s)